Standard Probe Kit, MH8
|
| |
|
Probe Head |
|
CMM Style: Manual and DCC
Manually indexed probe head
with repeatable positioning eliminating the need
to re-qualify. Provides indexing 360° in the
horizontal plane and 90° of elevation in 15°
steps. Accepts all M8 mounted touch probes (TP2,
TP6,
TP20,
TP200).
see
Renishaw.com - MH8 Specification Sheet. |
 |
|
| |
|
Standard Stylus Kit |
 |
 |
 |
 |
 |
 |
|
|
|
Qu. |
Part Number |
Description |
|
1 |
A-5000-4156 |
ø6 x 10 mm |
|
1 |
A-5000-4161 |
ø4 x 20 mm |
|
1 |
A-5000-3603 |
ø2 x 20 mm |
|
1 |
M-5000-3647 |
10 mm Extension |
|
|
Qu. |
Part Number |
Description |
|
1 |
M-5000-3648 |
20 mm Extension |
|
2 |
M-5000-3540 |
Stylus Tool |
|
Note: M2 Stylus Mount |
|
|
| |
Recommended Options
|
|
Extended Stylus Kit |
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
 |
|
 |
|
|
 |
|
Qu. |
Part Number |
Description |
|
2 |
A-5000-4156 |
ø6 x 10 mm |
|
2 |
A-5000-4161 |
ø4 x 20 mm |
|
2 |
A-5000-3603 |
ø2 x 20 mm |
|
2 |
A-5000-7806 |
ø1 x 10 mm |
|
2 |
M-5000-4162 |
30 mm Extension |
|
2 |
M-5000-3647 |
10 mm Extension |
|
|
Qu. |
Part Number |
Description |
|
4 |
M-5000-3648 |
20 mm Extension |
|
2 |
M-5000-3540 |
Stylus Tool |
|
1 |
A-1042-1486 |
Spanner Wrench |
|
1 |
A-5000-3627 |
5-Way Center |
|
1 |
A-1015-7642 |
Storage Box |
|
Note: M2 Stylus Mount |
|
|
| |
|
Probe Extension Kit A-1047-7005 |
|
CMM Style: Manual and DCC
A probe extension between the
head and the touch probe is used to probe deep
features. The M8 thread accepts TP2, TP20 and
TP200 probes. The kit contains three lightweight
bars made from Aluminum.
The complete kit contains the
following parts.
| |
Part Number |
Length / Description |
|
PEL1 |
A-1047-3484 |
50 mm |
|
PEL2 |
A-1047-3485 |
100 mm |
|
PEL3 |
A-1047-3486 |
200 mm |
| |
A-1015-7694 |
Mahogany Box |
| |
A-1047-3932 |
Double Ended Spanner Tool |
|
 |
|
|
MCR20 Stylus Change Rack |
|
CMM Style: DCC
The MCR20 stylus module changing
rack provides rapid automatic change of modules
without the need to re-qualify. Rack functions
completely passive not requiring electrical
connections. Installation and set up is simple
with the aid of a set-up routine in Geomet
properly locating the rack within the machine
coordinates. The rack is mounted on a stem that
is designed with built-in over travel that
serves as crash protection.
The MCR20 comes with two
modules (6 position rack). The rack can be configured for 2, 3, 4
or 6 ports which are covered with protective
docking plates to shield the modules from dirt
and debris. |
 |
|
| |
| |
