PH10M Probe Kit

Standard Probe Kit, PH10M

Probe Head

CMM Style: DCC

The PH10M probe head is designed with the Autojoint to accommodate longer extensions (300 mm) as well as the heavier scanning and optical probes, SP25 and OTP6M. The autojoint is compatible with the ACR1, probe and extension change system.

With the use of the PAA1 adapter , standard M8 mounting touch probes can be used. When using the PAA1 adapter, the system is compatible with the MCR20 and SCR200 stylus change racks.

see Renishaw.com - PH10M Specification Sheet.

Standard Components in the Helmel Stylus Kit

Qu.	Part Number	Description
1	A-5000-4156	ø6 x 10 mm
1	A-5000-4161	ø4 x 20 mm
1	A-5000-3603	ø2 x 20 mm
1	M-5000-3647	10 mm Extension

Qu.	Part Number	Description
1	M-5000-3648	20 mm Extension
2	M-5000-3540	Stylus Tool
1	M-5000-4163	M3/M2 Adapter
Note: M3/M2 Adapter included

Recommended Options

Extended Stylus Kit

Qu.	Part Number	Description
2	A-5000-4156	ø6 x 10 mm
2	A-5000-4161	ø4 x 20 mm
2	A-5000-3603	ø2 x 20 mm
2	A-5000-7806	ø1 x 10 mm
2	M-5000-4162	30 mm Extension
2	M-5000-3647	10 mm Extension

Qu.	Part Number	Description
4	M-5000-3648	20 mm Extension
2	M-5000-3540	Stylus Tool
1	A-1042-1486	Spanner Wrench
1	A-5000-3627	5-Way Center
1	A-1015-7642	Storage Box
Note: M2 Stylus Mount

TP7M Touch Probe

Mounting	Autojoint, Multiwire
Stylus Mounting	M4
Repeatability	0.25 µm (0.000009")
Trigger Force XY	2.0 g
Trigger Force Z	15.0 g

The TP7M is based on strain gauge technology which provides a higher accuracy than standard touch probes. This technology should only be used on DCC style CMMs where the contact speeds can be controlled and constant. Requires the use of the PI7-2 probe interface.

Fixed Head	Manual Indexing Heads	Motorized Indexing Heads
PH6M		PH10M

SP25M Scanning Probe System

Mounting

Autojoint

Mounting	Magnetic/Optical
Resolution	<0.10 µm (<0.00004")
Stylus Length	20mm - 200mm

The SP25M scanning probe system has a compact 25mm diameter body that supports scanning and touch trigger probe configurations. There are 4 scanning modules to support various length styli and one TP20 touch probe adapter to data point capturing.

The SP25M system works with the UCC2 CMM Controller which provides full scanning and touch point operations. This system can be mounted on any Probe Head that supports the Autojoint with multiwire.

Additional accessories include various changing racks to fit your needs.

Fixed Head	Manual Indexing Heads	Motorized Indexing Heads
PH6M		PH10M

SP25M Scanning and Touch Probe Modules

CMM Style: DCC

The SP25M system has 4 scanning modules that provide a variety of stylus length, plus one TP20 touch probe adapter module to perform standard data point capturing.

	Body Length	Max Stylus Len.
SM25-1	26.25 mm	20 mm - 50 mm
SM25-2	33.85 mm	20 mm - 75 mm
SM25-3	48.05 mm	20 mm - 100 mm
SM25-4	63.05 mm	20 mm - 200 mm
TM25-20	16.95 mm	Module Dependent

ACR1 Stylus Change Rack

CMM Style: DCC

The ACR1 probe change system is designed to work with autojoint compatible probe heads such as the PH10M. There are 8 bays available for a variety of extensions and probe combination including touch probe and scanning probes.

The ACR1 change rack requires the use of the ACC2-2 control system.