| |
|
CMM Probe Heads
Your probe system starts with the Probe Head. The selection
of the probe head will determine the touch probe type,
extension capabilities, articulation and even scanning. |
|
Probe Summary
|
Probe Heads |
Touch & Scanning Probes
|
Stylus Chart |
|
|
|
|
|
|
|
TP1S/TP1SM |
|
CMM Style: Manual and DCC
Two piece system, one body
mounted in a fixed vertical axis. The TPs/TPSM
is a 1 inch diameter, shank mounted probe that
is ideally suited for manual CMM operations due
to its robust design and extended over travel
range. It has an M3 stylus mount that carries a
wide range of styli.
View the complete TP1S/TP1SM
Probe Kit.
Probe Heads Home |
 |
|
|
|
|
PH6 |
|
CMM Style: Manual and DCC
The compact vertical and fixed
head accepts all M8 mounting probes (TP2,
TP6,
TP20,
TP200). Economical approach if indexing is
not required. Recommended for production
applications in conjunction with the stylus rack
with up to 6 stylus configurations.
Compatible
with the
MCR20 and
SCR200 stylus change racks.
View
the complete PH6 Probe Kit.
Probe Heads Home |
 |
|
|
|
|
PH6M |
|
CMM Style: Manual and DCC
The PH6M is a fixed head with
an autojoint connection that is compatible with
multiwired probes
SP25,
OPT6M and
TP7M.
TP20
touch probes can be used with the use of the
TM25-20 adapter. With the use of the
TM25-20, standard M8 mounting
touch probes can be used. When using the TM25-20
adapter, the system is compatible with the
MCR20
and
SCR200 stylus change racks.
View the complete PH6M Probe Kit.
Probe Heads Home |
 |
|
|
|
|
PH1 |
|
CMM Style: Manual and DCC
A manual probe head that offers
non-repeatable, articulation in the A and B
axes. The A axis swivels 0° to 115° with a cap
head lock screw. The B axis rotates 360° with a
friction based, 15° manual set index stops.
Offers limited over travel for crash
protections. Accepts all M8 mounted touch probes (TP2,
TP6,
TP20,
TP200).
View the complete PH1
Probe Kit.
Probe Heads Home |
 |
|
|
|
|
|
|
|
|
MH20 |
|
CMM Style: Manual and DCC
Manually indexed probe head with
non-repeatable positioning. Provides indexing 0°
- 93° in the A-axis and 300° rotation in the
B-axis. Accepts the interchangeable modules of
the TP20 probe system. Modules can be changed
without the need to re-qualify as long as the
A/B axes have not changed.
View the complete MH20
Probe Kit.
Probe Heads Home |
 |
|
|
|
|
MIH |
|
CMM Style: Manual and DCC
Manually indexed probe head with
repeatable positioning eliminating the need to
re-qualify. Provides indexing 360° in the
horizontal plane and 90° of elevation in 15°
steps. Accepts all Autojoint mounted touch probes
(TP7M,
TP6A)
or M8 style touch probes when using the PAA
adapter (TP2,
TP6,
TP20,
TP200).
View the complete
MIH
Probe Kit.
Probe Heads Home |
 |
|
|
|
|
|
|
|
|
MH20i |
|
CMM Style: Manual and DCC
Manually indexable probe head with a built in
TP20 kinematic mount. The exchangeable modules allow the use
of multiple styli configurations in any of the
168 indexable and repeatable positions
eliminating the need for re-qualifications.
Note: The MH20i is compatible
with the
MSR1 module stylus rack, but not with
the MCR20 module change rack.
View the complete MH20i
probe kit.
Probe Heads Home |
 |
|
|
|
|
RTP20 |
|
CMM Style: DCC
A low cost / low profile
solution for "motorized" probe head
requirements. This compact probe head is
designed for use on DCC style CMMs. Indexes in
the A and B direction in 15° increments
utilizing the powered axes of the CMM to
articulate the probe head.
Based on the MH20i probe head and compatible
with the
TP20 touch probe.
Compatible
with the
MCR20 stylus change rack.
View the complete RTP20 probe kit.
Probe Heads Home |
 |
|
|
|
|
|
|
|
|
PH10M |
|
CMM Style: DCC
The PH10M probe head is designed
with the Autojoint to accommodate longer
extensions (300 mm) as well as the heavier
scanning and optical probes,
SP25M, SP600M and
OTP6M.
The autojoint is compatible with the
ACR1, probe
and extension change system.
With the use of the PAA1, standard M8 mounting
touch probes can be used (TP2,
TP6,
TP20,
TP200). When using the PAA1
adapter, the system is compatible with the
MCR20
and
SCR200 stylus change racks.
View the complete PH10M probe kit.
Probe Heads Home |
 |
|
|
|
|
MP100 |
|
CMM Style: Manual
The MP100 MultiProbe is
designed to extend your manual CMM capabilities
by including a video, non-contact probe system
to compliment your existing touch probe
capabilities.
The MultiProbe includes a high-resolution color
CCD camera with a video crosshair generator and
LED ring illumination. The unti incorporates a
M8
View the complete
MP100 probe kit.
Probe Heads Home |
 |
|
| |
